SR-1006FA - Colour touch 4 RGB RF Receiver- 4 Zone
Product Code:
SR-1006FA
Brand:
LED RGB
Product Condition:
New
Units in Stock:
0
weight:
150.0g
Description
The SR-1006FA works via an RF signal linking it to the Colour Touch 4 RGB remote control. It has 3 channels of output meaning it can drive red , green and blue LED fixtures such as LED RGB Tape and Spotlights/Downlights. It comes equipped with an receiving signal indicator and a learning button for quick and easy link up to the remote. Each receiver can be linked to any of the 4 zones on the Colour Touch 4 RGB Remote.
Use this receiver in conjunction with the Colour Touch 4 RGB Remote
Parameters
Input voltage: 12-36V DC
Output voltage: 12-36V DC
Output PWM channels: 3
Output Amps (per channel): 5A (15A Overall)
Output Wattage (per channel): 60W @ 12V, 120W @ 24V, 180W @ 36V
If you are unsure how much LED you can run with this driver, it can be worked out by WATTS = AMPS X VOLTS. Here are some examples using the SR-1006FA. Please ensure you know the voltage of your fixture.
5A X 24V = 120W (24v fixtures)
5A X 12V = 60W (12v fixtures)
5A X 36V = 180W (36v fixtures, rare)
Note: Please do not exceed the maximum output as this could cause the receiver to fail. All PSU's that supply these receivers must be fused with the correct fuse in place. A competent person must perform this installation.
For more information and manuals on any of our products please get in touch via our contactspage.
Updating Order Details
Please do not refresh or navigate away from the page!
Reviews
No Reviews Posted Yet - be the first!
write review
